




Before you call a repair person for your oven, check this list of possible problems and solutions.
Neither the oven’s display nor the oven operate:
- Properly insert the plug into a grounded outlet.
- If the outlet is controlled by a wall switch, make sure the wall switch is turned on.
- Remove the plug from the outlet, wait ten seconds, then plug it in again.
- Reset the circuit breaker or replace any blown fuse.
- Plug another appliance into the outlet; if the other appliance doesn’t work, have a qualified electrician repair the outlet.
- Plug the oven into a different outlet.
The oven’s display works, but the power won’t come on:
- Make sure the door is closed securely.
- Check to see if packing material or other material is stuck to the door seal.
- Check for door damage.
- Press
- STOP/CLEAR pad twice and re-enter all cooking instructions.
The power goes off before the set time has elapsed:
- If there has not been a power outage, remove the plug from the outlet, wait ten seconds, then plug it in again.
- If there was a power outage, the time indicator will display:
- Reset the clock and any cooking instructions.
- Reset the circuit breaker or replace any blown fuse.
The food is cooking too slowly.
- Make sure the oven is on its own 20-amp circuit line. Operating another appliance on the same circuit can cause a voltage drop. If necessary, move the oven to its own circuit.
You see sparks or arcing.
- Remove any metallic utensils, cookware, or metal ties. If using foil, use only narrow strips and allow at least one inch between the foil and interior oven walls.
Using your oven causes TV or radio interference.
- This is similar to the interference caused by other small appliances, such as hair dryers. Move your oven further away from other appliances, like your TV or radio.
A website like www.PartSimple.com will provide you with the highest quality information on Oven.
If you need to order replacement parts, we recommend that you purchase from http://www.partsimple.com/range-oven-stove.html online Store. These parts will fit right and work right because they are made with the same precision used to build every new Oven.


